中国科技术语 ›› 2020, Vol. 22 ›› Issue (6): 88-93.doi: 10.3969/j.issn.1673-8578.2020.06.018

• 探讨与争鸣 • 上一篇    下一篇

原地浸出采铀几个科技术语的讨论

王海峰1(), 陈梅芳2   

  1. 1.核工业北京化工冶金研究院,北京 101149
    2.新疆中核天山铀业有限公司,新疆伊犁 835000
  • 收稿日期:2020-10-05 出版日期:2020-12-25 发布日期:2020-12-25
  • 作者简介:王海峰(1948—),男,大学本科,核工业北京化工冶金研究院研究员,主要研究方向为原地浸出采铀。通信方式:wanghf234@sina.com

Discussion on Some Technical Terms of In-situ Leaching of Uranium

WANG Haifeng1(), CHEN Meifang2   


  • Received:2020-10-05 Online:2020-12-25 Published:2020-12-25

摘要:

近些年,地浸采铀技术的进步极大刺激了国内地浸采铀矿山建设的蓬勃发展,新技术、新工艺不断涌现。但是,在地浸采铀相关术语的理解和使用中存在各种问题。在分析科技文献和地浸采铀实践的基础上,经过多年的推敲,作者认为:资源利用率、金属浸出率、液固比、平米铀量等作为地浸采铀科技术语存在定义不严谨、运用错误等不科学现象。

关键词: 地浸采铀, 资源利用率, 金属浸出率, 液固比, 平米铀量

Abstract:

In recent years, the progress of in-situ leaching uranium mining technology has greatly stimulated the vigorous development of in-situ leaching uranium mine construction in China, and new technologies and processes are emerging constantly. However, there are various problems in the understanding and use of in-situ leaching uranium technical terms. Based on the analysis of scientific and technological documents and the practice of in-situ leaching of uranium, the author considers that there are some unscientific phenomena in the scientific and technological terms of in-situ leaching uranium, such as resource utilization rate, metal leaching rate, liquid-solid ratio, uranium content per square meter, etc.

Key words: in-situ leaching of uranium, resource utilization rate, metal leaching rate, liquid-solid ratio, uranium content per square meter

中图分类号: