扫码分享
中国科技术语 ›› 2020, Vol. 22 ›› Issue (6): 16-20.doi: 10.3969/j.issn.1673-8578.2020.06.003
• 术语学研究 • 上一篇 下一篇
曹易()
收稿日期:
出版日期:
发布日期:
作者简介:
CAO Yi()
Received:
Online:
Published:
摘要:
以术语标准中的分类为基础建立模型,是实现质量管理信息化系统通用化模型的一种思路。文章在术语国际标准提供的术语分类体系基础上,提出了一个印制电路组件制造质量控制系统模型的总体框架,并在分析国际术语标准对产业界信息化发展反应的同时,针对质量管理实例评估了标准术语的应用情况。
关键词: 印制电路组件, 术语, 质量管理, 信息化, 国际电工委员会标准
Abstract:
Due to facts of cost reduction from application of automatic systems, there is a possible to expectation of optimizing in terms of quality and cost under helping to information technology. This paper provides a framework of a model for quality management information systems based on classification system given from the IEC printed circuit board assembly (PCBA) terminology standard, and also reports changes of terminology standard related to application of information technology in the field .
Key words: PCBA, terminology, quality management, informatization, IEC
中图分类号:
N04 (术语规范及交流)
H059 (翻译学)
曹易. 印制电路组件质量管理的信息化与术语标准的发展[J]. 中国科技术语, 2020, 22(6): 16-20.
CAO Yi. Terminology Standards and Product Quality Information Management System in Printed Circuit Board Assembly Manufacture[J]. China Terminology, 2020, 22(6): 16-20.
/ 推荐
导出引用管理器 EndNote|Ris|BibTeX
链接本文: https://www.term.org.cn/CN/10.3969/j.issn.1673-8578.2020.06.003
https://www.term.org.cn/CN/Y2020/V22/I6/16